MSI MS-6132 Instruction Manual page 75

CHAPTER 3

Assign IRQ for VGA

Lets the user choose which IRQ to assign for VGA card.

Assign IRQ for USB

Set to Enabled when USB port will be used. Set to Disable if the

USB port will not be used.

Used MEM base addr

Lets the user choose the Legacy ISA addr. The settings are NA#,

C800, CC00, D000, D400, D800 OR DC00.

Used MEM Length

Select a length for the memory area specified in the previous field.

The setting are 8K, 16K, 32K, or 64K.

3.9 Load Setup Defaults

This Main Menu item loads the default system values. If the CMOS

is corrupted the defaults are loaded automatically. Choose this item and the

following message appears:

To use the Setup defaults, change the prompt to "Y" and press < Enter >

Note:

The Setup defaults can be customized to increase performance.

However the BIOS defaults can always be used as a back up if

there is some problem with the mainboard operation.

" Load Setup Defaults (Y / N) ? N "

3-27

AWARD

BIOS SETUP

AWARD

BIOS SETUP