MSI MS-6132 Instruction Manual page 71

CHAPTER 3

Resume by Alarm

This function is for setting date and time for your computer to boot

up. During Disabled, you cannot use this function. During Enabled, choose

the Date and Time Alarm:

Date(of month) Alarm

Time(hh:mm:ss) Alarm

Note: If you have change the setting, you must let the system boot up until

it goes to the operating system, before this function will work.

IRQ 8 Break Suspend

You can Enable or Disable monitoring of IRQ 8 so it does not awaken

the system from suspend mode.

Reload Global Timer Events

IRQ[3-7,9-15], NMI

Primary IDE 0

Primary IDE 1

Secondary IDE 0

Secondary IDE 1

Floppy Disk

Serial Port

Parallel Port

During Enabled, any event occuring on each device listed above will

restarts the global time for Standby Mode.

You can choose which day of the month the

system will boot up. Set to 0, to boot every day.

You can choose what hour, minute and second

the system will boot up.

: Disabled

: Enabled

: Disabled

: Enabled

: Disabled

3-23

AWARD

BIOS SETUP

AWARD

BIOS SETUP