Advertisement
CHAPTER 4
CHAPTER 4
CHAPTER 4
CHAPTER 4
CHAPTER 4
Standby Time Out
This option specifies the length of a period of system inactivity while
in Full power on state. When this length of time expires, the computer enters
Standby power state. The settings are Disabled, 1 min, 2 min, 4 min, 8 min,
10 min, 20 min, 30 min, 40 min, 50 min or 60 min. The Optimal and Fail-Safe
default settings are Disabled.
Suspend Time Out
This option specifies the length of a period of system inactivity while
in Standby state. When this length of time expires, the computer enters
Suspend power state. The settings are Disabled, 1 min, 2 min, 4 min, 8 min,
10 min, 20 min, 30 min, 40 min, 50 min or 60 min. The Optimal and Fail-Safe
default settings are Disabled.
Throttle Slow Clock Ratio
This option specifies the speed at which the system clock runs in
power saving states. The settings are expressed as a ratio between the
normal CPU clock speed and the CPU clock speed when the computer is in
the power-conserving state.
Modem Use IO Port
This indicates which IO port will be used by the Modem(if there is a
Modem).
Modem Use IRQ
This indicates which IRQ no. will be used by the Modem(if there is a
Modem).
®
AMI
AMI
BIOS USER'S GUIDE
BIOS USER'S GUIDE
AMI
AMI
AMI
BIOS USER'S GUIDE
BIOS USER'S GUIDE
BIOS USER'S GUIDE
4-18
Advertisement
