Task 5 - Configuring The Scs/Tne Emulation - Lexmark X644E User Manual

Configuring the
I :
MPORTANT
Powering the printer Off and On does not end
TCP/IP and Telnet sessions in an orderly manner.
To power the printer Off properly, select Menus >
Option Card Menu > SCS/TNe MENU >
COMMON SETUP > Disconnect Ses >
Disconnect Ses.
See: Disconnect Ses, page 78.
Mainframe Installation Setup: Task 5 - Configuring the SCS/TNe Emulation
Task 5 -
SCS jobs are printed from a LAN connected Mainframe using TCP/
IP and the telnet extended (TN3270e) protocol. A single TN3270e
SCS/TNe
print session can be established with a host.
Emulation
To configure a TN3270e print session
3
Exit the menu by touching Home.
1
Select Menus > Option Card Menu > SCS/TNe MENU >
TN3270E SETUP > NETWORK SETUP > SERVER INFO.
2
Configure the SERVER INFO options. Enter or scroll to new
values and touch Submit to save your settings. The menu
will return to the SERVER INFO menu group within which
you scroll to the next desired option. When you are finished
with all options within SERVER INFO, touch Home to exit.
45