Lexmark X644E User Manual page 92

Connect Status: Last response messages
Lst Rsp:The server cannot satisfy the request
Lst Rsp:Invalid association
Lst Rsp:The device is a partner to some terminal The SCS/TNe Emulation used the CONNECT command in its
Lst Rsp:Error occured
Operations - TN3270E SETUP: NETWORK SETUP > Connect Status
Comments
The TN server cannot satisfy the request sent by the SCS/TNe
Emulation. It could be a request was made for a specific terminal or
printer which is not in any of the TN server's pools of device names.
Alternatively, the ASSOCIATE command was used but no partner
printers are defined to the TN server.
The SCS/TNe Emulation used the ASSOCIATE command. The
device type is not a printer or the device name is not a terminal.
request for a specific printer. The device name requested is the
partner to some terminal.
An unknown error when processing the device type or name has
occurred.
92