Solving fax problems
The numbers stored in the Speed Dial memory do not dial
correctly.
Make sure the numbers are stored in the speed dial memory correctly. To print
a speed dial list:
1
Press Setup.
2
Press Menu until you see PRINT REPORT.
3
Press Options until you see SPEED DIAL LIST.
4
Press Start to print the list.
The All-In-One cannot receive faxes automatically.
Make sure your fax receive mode is set to either ANS/FAX or FAX. For help,
see page 11.
The All-In-One cannot receive faxes manually.
Make sure you do one of the following:
•
Press Start twice on the All-In-One operator panel.
•
Press *9* on your telephone, and then hang up.
Other fax transmission problems
The machine sending you a fax or the machine you are sending a fax to may
be turned off, out of paper, or disabled. Contact the owner of that machine if
you experience the following problems:
•
Your All-In-One will not send a fax.
•
Incoming faxes are incomplete.
•
Incoming faxes have blank spaces.
•
Incoming faxes have spots.
•
Incoming faxes are of poor quality.
•
Incoming faxes have stretched words.
•
Your All-In-One dials a number, but cannot make a connection with
another fax machine.
16