Using The Pictbridge Menu - Lexmark X3550 Getting Started

Saving Paper Size, Paper Type, and Photo Size settings
1
From the control panel, press Settings.
2
Press or repeatedly until Paper Setup appears.
3
Press .
4
Press or repeatedly until Paper Size appears.
5
Press .
6
Press or repeatedly until the size you want appears.
7
Press .
8
Press to go to the Paper Type submenu.
9
Press .
10
Press or repeatedly until the setting type you want appears.
11
Press .
12
Press repeatedly until Defaults appears.
13
Press .
14
Press or repeatedly until Photo Print Size appears.
15
Press .
16
Press or repeatedly until the setting you want appears.
17
Press .

Using the PictBridge menu

The PictBridge default settings menu lets you select printer settings if you did not specify the settings beforehand
on your digital camera. For more information on making camera selections, see the documentation that came with
your camera.
1
Connect a PictBridge-enabled digital camera to the printer.
a
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
b
Insert the other end of the cable into the PictBridge port on the front of the printer.
Note: The PictBridge port is marked with the PictBridge symbol.
32