Lexmark X3550 Getting Started page 34

3
Press .
4
Press or repeatedly until the submenu item you want or the setting you want appears.
5
Press .
Note: When you choose a value selection, an * appears next to the selected setting.
6
To go into additional submenus and settings, repeat step 4 and step 5 as needed.
7
If necessary, press
From here
Maintenance
Paper Setup
Device Setup
Defaults
Network Setup
repeatedly to return to the previous menus and make other selections.
You can
Select:
•
Ink Level to view the ink level of the color cartridge. Press
•
Clean Cartridges to clean the print cartridge nozzles. For more
information, see "Cleaning the print cartridge nozzles" in the
"Maintaining the printer" chapter of the User's Guide on the CD.
•
Align Cartridges to align the cartridge. For more information, see
"Aligning print cartridges" in the "Maintaining the printer" chapter
of the User's Guide on the CD.
•
Print Test Page to print a test page.
Select the size and type of paper loaded.
Select:
•
Language to change the language setting.
•
Country to set the default blank paper size and date format being
used in your location.
•
Clear Settings Timeout to change the timeout feature before the
printer, if left unused, resets to the factory default settings. For
more information, see "Saving settings" on page 35.
•
Power Saver to set the number of minutes before the printer, if
left unused, enters the Power Saver mode.
Select:
•
Photo Print Size to choose the size of photo(s) to print.
•
Set Defaults to change default settings. For more information,
see "Saving settings" on page 35.
Select:
•
Print Setup Page to print a page that lists the network settings.
•
Wireless Setup to view:
–
–
–
•
TCP/IP to reset the IP address.
to view the ink level of the black (or photo) cartridge.
Network Name, which shows the six characters unique to
your specific printer.
Wireless Signal Quality, which shows the signal strength.
Reset Network Adapter to Factory Defaults, which lets you
reset the wireless network settings.
34
or