Minute Timer; Temperature Conversion (Fahrenheit/ Celcius) - Kenmore 790.9010 Series Use & Care Manual

Setting the
Clock
FEATURE OVERVIEW

• Minute Timer

Minute Timer
INSTRUCTIONS
To Set the Minute Timer
1. Push .
2. Push the to increase the time in one minute increments. Push and hold
the to increase the time in 10 minute increments. The timer can be set
for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you push the
minutes.
3. The display shows the timer count down in minutes until one minute
remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will then
continue to beep 3 times every 60 seconds until
Note: The minute timer does not start or stop cooking. It serves as an extra
timer in the kitchen that will beep when the set time has run out. The minute
timer can be used alone or during any of the other oven functions. When the
minute timer is in use with any other mode, it will be shown in the display. To
view other functions, push the function pad for that mode.
To Change the Minute Timer while it is in use:
Push and hold the or
To Cancel the Minute Timer before the set time has run out:
Push .
Temperature Conversion (Fahrenheit/Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. To change the temperature to
°C (Celsius) or from °C to °F:
INSTRUCTIONS
To change the temperature to °C (Celsius) or from °C (Celsius)
to °F (Fahrenheit)
(control should not be in a Bake or Clean mode):
1. Push . "— — —" appears in the display.
2. Push and hold the
3. Push and hold until °F or °C appears in the display.
4. Push the or to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
first, the timer will advance to 11 hours and 59
to increase or decrease the time.
until "HI" appears in the display.
is pushed.
14
PRESS DISPLAY
or
or
PRESS DISPLAY
or