Samsung AC BNJDCH Series Installation Manual page 24

Installation Procedure
Example) If you want to set as "MAIN: 3, CHANNEL: 1, RMC: B",
SEG1
0
SEG7
1
assign option codes except SEG 1, 7 which are page options.
Setting the installation options in a batch
Installation option No. for an indoor unit address: 02XXXX-1XXXXX-2XXXXX-3XXXXX
1 Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power supply.
2 Set the installation options of indoor units, by referring to the following table and by following the steps in Common steps for
setting the addresses and options on page 19.
• The installation options of indoor units are set to 020010-100000-200000-300000 by default.
• The SEG20 option, Individual control with remote control, allows you to control multiple indoor units individually by using the
remote control.
Option SEG1
Function Page
Indication Details Indication
Indication
and details
0
24
English
SEG2 SEG3
A 1
SEG8 SEG9
- 1
SEG2 SEG3
Use of external room temperature sensor / Minimizing fan operation
Mode
Details Indication
0
1
2
Reserved
3
4
5
2
6
7
8
9
A
B
SEG4
-
SEG10
-
SEG4
when thermostat is off 1)
Details
Use of
external room Minimizing fan operation when
temperature thermostat is off
1)
sensor
Disuse Disuse
Use Disuse
Disuse Use(Heating)
Use Use(Heating)
Disuse Use(Cooling)
Use Use(Cooling)
Disuse Use (Cooling/Heating)
Use Use (Cooling/Heating)
Disuse Use (Cooling Ultra low speed)
Use Use (Cooling Ultra low speed)
Disuse Use (Heating/Cooling Ultra low speed)
Use Use (Heating/Cooling Ultra low speed)
SEG5 SEG6
- 3
SEG11 SEG12
1 B
SEG5 SEG6
Central control
Indication Details
0 Disuse
Reserved
1 Use