Table of Contents
Advertisement
Installation Procedure
17 Setting SEG21, SEG22 option
Press Low Fan button
Press High Fan button
Each time you press the button,
18 Setting Heat mode
Press Mode button to be changed to Heat mode in the OFF status.
19 Setting SEG23, SEG24 option
Press Low Fan button
Press High Fan button
Each time you press the button,
3 Check whether the option values that you have set are correct by pressing the
[SEG2, SEG3]
[SEG4, SEG5]
[SEG21, SEG22]
[SEG23, SEG24] 4
4 Save the option values into the indoor unit:
Press the
button with the direction of remote control for set. For correcting option values, input the option values twice.
5 Check whether the air conditioner operates in accordance with the option values you have set:
a Reset the indoor or outdoor unit.
• Indoor unit : Press the
• Outdoor unit : Press the K3 button.
b Remove the batteries from the remote control, insert them again, and then press the
22
English
Option setting
to enter SEG21 value.
to enter SEG22 value.
will be selected in rotation.
to enter SEG23 value.
to enter SEG24 value.
will be selected in rotation.
[SEG6, SEG8]
[SEG9, SEG10] 0 0
(Set) and
(Low Fan) buttons on the remote control simultaneously for 4 seconds.
SEG21
SEG23
button repeatedly.
[SEG11, SEG12]
[SEG14, SEG15]
button on the remote control.
Status
SEG22
SEG24
[SEG16, SEG17] 7
[SEG18, SEG20] 0 0
Advertisement
Table of Contents
