Exiting Diagnostic Mode
1.
Turn the key to the O
Figure 45
1. Ignition key
2. S
position
TOP
2.
Remove the single-pin connector from the
single-socket connector
Figure 46
3.
Plug the single-pin connector and the
single-socket connector into tethered cap
(Figure
46).
position
(Figure
45).
FF
3. R
/A
position
UN
CCESSORY
4. S
position
TART
(Figure
46).
Cleaning
Washing the Machine
Important:
Do not use brackish or reclaimed
water to clean the machine.
Important:
Do not pressure wash the machine.
•
Wash the machine with mild detergent and water.
•
Avoid excessive use of water, especially near the
control console.
Disposing of Waste
Engine oil, engine and remote control batteries are
pollutants to the environment. Dispose of these
according to your state and local regulations.
g341833
g342082
39