Toro Pro Force 44553 Operator's Manual page 35

Figure 39
4. Simultaneously press and hold the
and R
NOZZLE LEFT
(Figure 40).
Note:
The LED will blink about once per
second.
Figure 40
1. R
OTATE NOZZLE LEFT
button
5. Continue to hold both buttons until the LED
begins blinking about twice per second.
6. Release both buttons.
7. Press and hold the
(Figure 40).
Note:
The LED will blink about twice per
second.
8. Continue holding the
(Figure 40) and turn the ignition key start to the
R position.
UN
Note:
The LED turns solid if the procedure is
successful. It may take up to 20 seconds for the
LED turns solid.
ROTATE
buttons
OTATE NOZZLE RIGHT
2. R
OTATE NOZZLE RIGHT
button
button
ROTATE NOZZLE LEFT
ROTATE NOZZLE LEFT
9. Release the
40), and rotate the ignition key to the S
position.
Note:
use with the associated handheld remote.
g343880
g343716
button
35
ROTATE NOZZLE LEFT
The remote-control system is ready for
button (Figure
TOP