Daily Maintenance Checklist; Pre-Maintenance Procedures; Preparing For Maintenance - Toro Pro Force 44553 Operator's Manual

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the engine oil level.
Clean the engine screen and
the oil cooler.
Inspect the air filter
pre-cleaner.
Check the tire air pressure.
Check blower nozzle
mounting clamp torque
Clean the nozzle guides.
Check any unusual engine
noises.
Check for fluid leaks.
Touch-up damaged paint.
Notation for Areas of Concern
Inspection performed by:
Item
Pre-Maintenance
Procedures
CAUTION
Failure to properly maintain the machine
could result in premature failure of machine
systems causing possible harm to you or
bystanders.
Keep the machine well maintained and in
good working order as indicated in these
instructions.
For the week of:
Mon. Tues. Wed. Thurs.
Date Information
WARNING
If you leave the key in the ignition switch,
someone could accidently start the engine
and seriously injure you or bystanders.
Remove the key from the ignition and
disconnect the wires from the spark plugs
before you do any maintenance. Set the wires
aside so that they do not accidentally contact
the spark plugs.

Preparing for Maintenance

1. Park the machine on a level surface.
2. Shut off the engine, remove the key, and wait for
all moving parts to stop.
3. Chock the wheels.
4. Remove the machine from the traction unit.
5. Allow machine components to cool before
performing maintenance.
6. Disconnect the spark-plug wire.
24
Fri. Sat. Sun.