Ford TOURNEO COURIER Owner's Manual page 187

A Emergency use only.
B Maintenance.
1. Locate the vehicle jacking points.
E93184
2. Indentations in the sills show the
location of the jacking points.
E92932
3. Place the hexagonal end of the lug nut
tool onto the vehicle jack.
4. Turn the lug nut tool clockwise to raise
your vehicle.
Removing the Spare Wheel
The spare wheel is under the rear of your
vehicle and removed using a winch system.
Tourneo Courier/Transit Courier (C4A) Vehicles Built From: 16-09-2021, CG3822en enGBR, Edition date: 202106, First-Printing
Wheels and Tires
A
183
2
4
E166659
1. Insert the hexagonal end of the lug nut
tool into the guide hole.
2. Turn the lug nut tool counterclockwise
until the spare wheel rests on the
ground and there is slack in the cable.
3. Unscrew the cap and slide it back, turn
the primary cable through 90 degrees
and remove it.
4. Unscrew the nut to remove the
secondary cable and the bracket.
Do not raise the spare wheel carrier
without a wheel attached. This can cause
damage not covered by the vehicle
Warranty.
1
3