Cruise Control; Principle Of Operation; Using Cruise Control - Ford TOURNEO COURIER Owner's Manual

PRINCIPLE OF OPERATION

Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 30 km/h (20 mph).

USING CRUISE CONTROL

WARNING: Do not use cruise
control on winding roads, in heavy traffic
or when the road surface is slippery. This
could result in loss of vehicle control,
serious injury or death.
WARNING: When you are going
downhill, your vehicle speed could
increase above the set speed. The
system does not apply the brakes.
The cruise controls are on the steering
wheel.
Switching Cruise Control On
Press the button. The indicator
E267224
appears in the information
display.
E71340
Vehicles with Speed Limiter
Press the button to return to
cruise control mode when in
speed limiter mode.
E71340
Setting the Cruise Speed
Drive to the required speed.
Press the button to set the
current speed.
Take your foot off the accelerator pedal.
Tourneo Courier/Transit Courier (C4A) Vehicles Built From: 16-09-2021, CG3822en enGBR, Edition date: 202106, First-Printing

Cruise Control

Note: The system cancels if the vehicle
speed drops below 16 km/h (10 mph) under
the set speed when driving uphill.
Changing the Set Speed
When you select km/h as the display
measurement in the information display
the set speed changes in approximately 1
km/h increments. When you select mph
as the display measurement in the
information display the set speed changes
in approximately 1 mph increments.
Canceling the Set Speed
Note: The set speed is stored.
Resuming the Set Speed
Switching Cruise Control Off
E267225
E71340
Note: You erase the set speed when you
switch the system off.
121
Press the button to increase the
set speed.
Press the button to decrease the
set speed.
Press the button, or tap the
brake pedal to cancel the set
speed.
Press the button to resume the
set speed.
Press the button when the
system is in standby mode, or
switch the ignition off.