Stability Control; Principle Of Operation; Using Stability Control - Ford TOURNEO COURIER Owner's Manual

PRINCIPLE OF OPERATION

Electronic Stability Control
WARNING: The system is designed
to aid the driver. It is not intended to
replace your attention and judgment.
You are still responsible to drive with due
care and attention.
The system supports stability when your
vehicle starts to slide away from your
intended path. The system does this by
braking individual wheels and reducing
engine torque.
The system also provides an enhanced
traction control function by reducing
engine torque if the wheels spin when you
accelerate. This helps to pull away on
slippery roads or loose surfaces, and
improves comfort by limiting wheel spin in
hairpin bends.
E72903
A Without ESC.
B With ESC.
Tourneo Courier/Transit Courier (C4A) Vehicles Built From: 16-09-2021, CG3822en enGBR, Edition date: 202106, First-Printing

Stability Control

Stability Control Warning Lamp

USING STABILITY CONTROL

Note: The system automatically turns on
each time you switch the ignition on.
You can switch the traction control system
off and on . See Using Traction Control
(page 113).
114
Flashes during operation. See
Warning Lamps and
Indicators (page 61).