Verifying Assignment Of Mark Vii Analog Output Signal; Step 13G: Daylight Harvesting/Photocells; Background-Daylighting - Leviton a-2000 User Manual

Page 62
To select a dimming circuit to modify:
Press the UP
1
Press the Select/Save button.
2
The LCD display shows
Press the UP
3
actual setup code.
Press the Select/Save button.
4
The LCD display shows
Press the Select/Save button.
5
The LCD display shows
Press the UP
6
to be modified (01A, 01B, 02A, etc.).
Press the Select/Save button to select the dimming circuit.
7
The flashing moves from the upper number to the lower
description.
To modify the channel:
Press the UP
1
LUMANET ADD=0001
or press the UP
DMX 512 ADD=001
Press the Select/Save button.
2
The flashing in the lower part of the display moves from the
description to the number.
Press the UP
3
to the desired new address.
Press the Select/Save button to store the new address.
4
The flashing returns to the description.
Push the Cancel/Clear button five times to return to the top level menu.
5

Verifying Assignment of Mark VII Analog Output Signal

Enter Set-up
1
Enter Set-up Modules
2
Select Modules and Circuits
3
Page once to Analog Out = X
4
Where X (1 - 8) is the analog out (auto) assigned. It can now be changed if
desired.

Step 13G: Daylight Harvesting/Photocells

Background-Daylighting:

In a daylight harvesting application, the goal is to maintain a consistent lighting
level within the space, regardless of the source of light which could be either
button until the LCD display shows Menu Setup.
Enter Setup Code = 999
and DOWN buttons to change the 999 to the
Setup Menu Setup Modules?
Setup Mod 01A
and DOWN buttons to change the dimming circuit
button twice to display the Luma-Net address,
button three times to display the DMX 512 address.
and DOWN buttons to change the flashing number
.
.
.