Other Ballast Types - Leviton a-2000 User Manual

Other Ballast Types

For other ballast wiring options, see the following page on Dimmer Module
Wiring.
a-2000
Dimmer Cabinets with Digital Controls
Revision G November 2006
The maximum number of 0-10 VDC dimming ballasts that can be
controlled on any one circuit is 100. (THIS IS A NEW FEATUE)
Double check the wiring to the dimmer output terminals that feed the
dimmer ballasts before turning on any power; these ballasts can be
adversely affected if the line voltage control wire and the switched line
connections are reversed. Make sure the dimmer ballasts are correctly
wired prior to turn on.
a-2000 User Guide
Page 39