Figure 8-14 Siemens Echelon; Terminator; Figure 8-15 Echelon ® Lan Wiring Examples - Siemens GCP5000 Instruction & Installation Manual

_________________________________________________________________________________________________________
•
A maximum of 8 connections (nodes) is recommended within 53 ft. (15.2 m) of cable.
If necessary additional cable may be added so that no more than 8 nodes are
located within any 53 ft./15.2 m length (see Figure 8-15).
•
If additional connections are required, contact Siemens Mobility, Inc. Technical
Support for assistance.
•
In general, the Echelon
performance to be connected at each end of the daisy-chained bus configuration
(see Figure 8-14).
•
The Echelon network can be connected to ECH1 on the 5000 GCP and the Echelon
terminator can be connected to ECH2 on the GCP5000 (GCE).
•
Order Network Echelon Termination Unit, part number 8000-80078-001
•
For further information, see Siemens Mobility, Inc. Echelon Configuration Handbook,
COM-00-07-09.
SIG-00-22-02
Version: B.1
®
network requires a terminator for proper data transmission
J101006_1715
10-10-06

Figure 8-14 Siemens Echelon

Figure 8-15 Echelon
8-43
DETAILED CASE AND MODULE DESCRIPTION
Echelon

Terminator

8000-80078-001
®
Terminator
®
LAN Wiring Examples
JUNE 2022 (Revised September 2022)
®