Figure 3-156 Sear Serial Ports: Aux Port; Table 3-9 Bullhorn/Modbus Settings; Table 3-10 Serial Port Settings - Siemens GCP5000 Instruction & Installation Manual

DISPLAY MODULE AND OFFICE CONFIGURATION EDITOR
_________________________________________________________________________________________________________
3.5.2.8.5 Bullhorn/Modbus
A SEAR IIi configured with a site type of Bullhorn/Modbus communicates with the office using a
Bullhorn cellular unit and the Modbus protocol. A Bullhorn/Modbus site has the following
settings.
Setting
Poll ID
3.5.2.9 Serial Port
The SEAR IIi has two serial ports, the USER port, and the AUX port, these are configured from
the Serial Port tab.
Setting
Baud Rate
Data Bits
Parity
Stop Bits
Flow Ctrl
SIG-00-22-02
Version: B.1

Table 3-9 Bullhorn/Modbus Settings

Modbus protocol poll identifier. 1-255

Table 3-10 Serial Port Settings

300, 600,1200,2400,4800,9600 (default),19200,38400, 57600
7,8 (default)
None (default), odd, even
1 (default), 2
None, Hardware, Radio

Figure 3-156 SEAR Serial Ports: AUX Port

3-108
Description
Description
JUNE 2022 (Revised September 2022)