Lincoln Electric FlexCut 200 CE Operator's Manual page 10

®
FlexCut 200 CE
Safety Standards Booklet Index
For further information concerning safety practices to be exercised
with plasma arc cutting equipment, please refer to the following
publications:
1. AWS Standard AWN, Arc Welding and Cutting Noise, obtainable
from the American Welding Society, 550 NW LeJeune Road,
Miami, FL 33126.
2. AWS Standard C5.2, Recommended Practices for Plasma Arc
Cutting, obtainable from the American Welding Society, 550 NW
LeJeune Road, Miami, FL 33126.
3. AWS Standard FSW, Fire Safety in Welding and Cutting,
obtainable from the American Welding Society, 550 NW
LeJeune Road, Miami, FL 33126.
4. AWS Standard F4.1, Recommended Safe Practices for
Preparation for Welding and Cutting of Containers and Piping,
obtainable from the American Welding Society, 550 NW
LeJeune Road, Miami, FL 33126.
5. AWS Standard ULR, Ultraviolet Reflectance of Paint, obtainable
from the American Welding Society, 550 NW LeJeune Road,
Miami, FL 33126.
6. AWS I ANSI Standard Z49.1, Safety in Welding, Cutting, and
Allied Processes, obtainable from the American Welding
Society, 550 NW LeJeune Road, Miami, FL 33126.
7. ANSI Standard Z41.1 , Standard For Men's Safety-Toe
Footwear, obtainable from the American National Standards
Institute, 11 West 42nd Street, New York, NY 10036.
8. ANSI Standard Z49.2, Fire Prevention in the Use of Cutting and
Welding Processes, obtainable from the American National
Standards Institute, 11 West 42nd Street, New York, NY 10036.
9. ANSI Standard Z87.1, Safe Practices For Occupation and
Educational Eye and Face Protection, obtainable from the
American National Standards Institute, 11 West 42nd Street,
New York, NY 10036.
10. ANSI Standard Z88.2, Respiratory Protection, obtainable from
the American National Standards Institute, 11 West 42nd
Street, New York, NY 10036.
11. OSHA Standard 29CFR 1910.252, Safety and Health
Standards, obtainable. from the U.S. Government Printing
Office, Washington, D.C. 20402.
12. NFPA Standard 51 , Oxygen - Fuel Gas Systems for Welding,
Cutting, and Allied Processes, obtainable from the National
Fire Protection Association, 1 Batterymarch Park, Quincy, MA
02269.
13. NFPA Standard 51 B, Cutting and Welding Processes,
obtainable from the National Fire Protection Association, 1
Batterymarch Park, Quincy, MA 02269.
14. NFPA Standard 70, National Electrical Code, obtainable from
the National Fire Protection Association, 1 Batterymarch Park,
Quincy, MA 02269.
15. CGA booklet P-1 , Safe Handling of Compressed Gases in
Containers, obtainable from the Compressed Gas Association,
1725 Jefferson Davis Highway, Suite 1004, Arlington, VA
22202.
16. CGA booklet P-14, Accident Prevention in Oxygen-Rich and
Oxygen-Deficient Atmospheres, obtainable from the
Compressed Gas Association, 1725 Jefferson Davis Highway,
Suite 1004, Arlington, VA 22202.
17. CGA booklet TB-3, Hose Line Flashback Arrestors, obtainable
from the Compressed Gas Association, 1725 Jefferson Davis
Highway, Suite 1004, Arlington, VA 22202.
18. CSA Standard W117 .2, Safety in Welding, Cutting, and Allied
Processes, obtainable from Canadian Standards Association,
178 Rexdale Boulevard, Toronto, Ontario M9W IR3, Canada.
19. Canadian Electrical Code Part 1, Safety Standard for Electrical
Installations, obtainable from the Canadian Standards
Association, 178 Rexdale Boulevard, Toronto, Ontario M9W 1
R3, Canada.
4
SAFETY