Cruise Control; Cruise Control Operation - Hyundai LX2 Owner's Manual

CRUISE CONTROL

Cruise Control operation

1. CRUISE ( ) indicator
2. Set speed
The Cruise Control system allows you
to drive at speeds above 30 km/h
(20 mph) without depressing the
accelerator pedal.
WARNING
Take the following precautions:
• Always set the vehicle speed
under the speed limit in your
country.
• If the Cruise Control is left on,
(CRUISE (
in the instrument cluster is
illuminated)
Control can be activated unin-
OIK057157
tentionally. Keep the Cruise
Control system off (CRUISE
indicator light OFF) when the
Cruise Control is not in use, to
avoid inadvertently setting a
speed.
• Use the Cruise Control sys-
tem only when traveling on
open highways
weather.
• Do not use the Cruise Control
when it may be unsafe to keep
the vehicle at a constant
speed:
- When driving in heavy traffic
or when traffic conditions
make it difficult to drive at a
constant speed
- When driving on rainy, icy, or
- When driving on hilly or
- When driving in windy areas
• Do not use cruise control
when towing a trailer.
) indicator light
i
the Cruise
• During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will acti-
vate after approximately 3 seconds.
This delay is normal.
• Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
in good
ating normally. Depress the brake
pedal at least once after turning ON
the ignition or starting the vehicle.
snow-covered roads
winding roads
Information
5
5-139