System Setting And Activation - Hyundai LX2 Owner's Manual

System setting and activation

System setting
• The driver can activate the sys-
tems by placing the ignition switch
to the ON position and by selecting
"User Settings → Driver assistance
→ Parking safety → Rear Cross
Traffic Safety". The RCCA and
RCCW turn on and get ready to be
activated when 'Rear Cross-Traffic
safety' is selected.
• When the engine is turned off then
on again, the systems are always
ready to be activated.
• When the system is initially turned
on and when the engine is turned
off then on again, the warning light
will illuminate for 3 seconds on the
outside rearview mirror.
The driver can select the initial warn-
ing activation time in the User
Settings in the LCD display by
selecting 'User Settings → Driver
assistance → Warning timing'. The
options for the initial Rear Cross-
Traffic Collision Warning includes the
following:
- Normal:
When this condition is selected, the
initial Rear Cross-Traffic Collision
Warning is activated normally. If this
setting feels sensitive, change the
option to 'Later'.
The warning activation time may feel
late if the a vehicle at the side or rear
abruptly accelerates.
- Later:
Select this warning activation time
when the traffic is light and you are
driving in a low speed.
i
Information
If you change the warning timing, the
warning time of other systems may
change. Always be aware before
changing the warning timing.
The driver can select the warning
volume of the Rear Cross-Traffic
Collision Warning by selecting 'User
Settings → Driver assistance →
Warning volume → High/Medium/
Low/Off'.
❈ Even if "Off" is selected, the warn-
ing alarm of below systems
sounds small.
- Parking Distance Warning sys-
tem
- Forward Collision-Avoidance
Assist system
- Safe Exit Assist system
i
Information
If you change the warning volume, the
warning volume of other systems may
change. Always be aware before
changing the warning volume.
For more details, refer to "LCD
Display" in chapter 3.
5
5-109