Lka System Function Change - Hyundai LX2 Owner's Manual

Driving your vehicle
When external condition is
intervened
• The brightness of outside changes
suddenly when entering/existing a
tunnel or passing under a bridge.
• The headlamps are not on at night
or in a tunnel, or light level is low.
• There is a boundary structure in
the roadway.
• The light of street, sun, oncoming
vehicle and so on reflects from the
water on the road.
• When light shines brightly in the
reverse direction you drive.
• Road surface is not evenness.
• The distance from the vehicle
ahead is very short or the vehicle
ahead drives hiding the lane line.
• You drive on a steep grade or a
sharp curve.
• The vehicle vibrates heavily.
• The temperature near inside mirror
is very high due to direct sun light
and etc.
5-126
When front visibility is poor
• The lens or windshield is covered
by strange materials.
• The sensor cannot detect the lane
because of fog, heavy rain or snow.
• The windshield is fogged by humid
air in the vehicle.
• Putting something on the crash
pad and etc.
WARNING
The Lane Keeping
System is a system to help pre-
vent the driver from leaving the
lane. However, the driver should
not solely rely on the system
but always take the necessary
actions for safe driving prac-
tices.

LKA system function change

The driver can change LKA to the
Lane Departure Warning (LDW) sys-
tem or change the LKA system mode
from the LCD display. Go to the
"User Settings → Driver Assistance
→ Lane Safety → Lane Keeping
Assist (LKA)/Lane
Warning (LDW)/Off".
The system is automatically set to
Lane Keeping Assist(LKA) if a func-
tion is not selected.
Assist
Lane Keeping Assist (LKA)
The LKA mode guides the driver to
keep the vehicle within the lanes. It
rarely controls the steering wheel,
when the vehicle drives well inside
the lanes. However, it starts to con-
trol the steering wheel, when the
vehicle is about to deviate from the
lanes.
Departure