Lfa Operation - Hyundai LX2 Owner's Manual

Driving your vehicle

LFA operation

The driver can turn on the LFA sys-
tem with the vehicle on and by
selecting 'User settings → Driver
assistance → Driving Assist → Lane
Following Assist' in the cluster LCD
display.
The LFA deactivates, when the driv-
er deselects the system setting from
the User Settings mode in the cluster
LCD display.
The set-up of the LFA system will be
maintained, as selected, when the
vehicle is restarted.
5-130
Operating conditions
The system activates when the Lane
Following Assist is selected from the
User Settings mode in the cluster
LCD display and when the following
conditions are satisfied:
- The Smart Cruise Control is in acti-
vation (vehicle deceleration and
acceleration)
- Vehicle speed is lower than 150
km/h (93 mph)
When the system is activated, the
indicator ( ) on the cluster will illu-
minate. The color of the indicator will
change depending on the condition
of LFA system.
- Green : The system is in the
enable state.
- White : The system is in the ready
state.
LFA activation
• After LFA is activated, if the vehicle
is within the lane and both lane
markers are detected (lane color
changes grey to white) and there is
no abrupt steering by the driver,
indicator light will change from
white to green. This indicates that
the LFA system is in the ENABLED
state and the steering wheel will be
able to be controlled.
• The indicator light changes from
green to white when the control is
temporarily cancelled.
OLX2058099L