Support Rails
If you are removing the support rails from an RS/6000 rack, go to "RS/6000 Support
Rails".
If you are removing the support rails from a Netfinity rack, go to "Netfinity Support Rails"
on page 237.
RS/6000 Support Rails
Step 1. If the back of the 7133 is fastened with clamp plates, go directly to step 4 to
Step 2. Refer to Figure 134.
Figure 134. Removing the Support Rails from an RS/6000 Rack
Step 3. Remove the screws 2 and the brackets 1 , then go to step 4.
Step 4. Remove the screws 3 , then remove the rails.
Step 5. If you need to reinstall the support rails (for example, because you are
232
7133 Models D40 and T40 Service Guide
remove the rails.
If the back of the 7133 is fastened with brackets, go to step 2.
relocating the 7133), or you need to install replacement rails, go to step 6 on
page 233.