Air-Fi Installation; Lte Modem Installation - Trane Symbio CVRF Installation Instructions Manual

bottom of Wi-Fi module and USB-A side to any one of the
four USB ports under the Symbio™ 800 controller.
Figure 17. Wi-Fi wiring, ref. 50712738
OPTIONAL
IMC
4Y1
WI-FI
A - +
ANTENNA
P1
BACKNET
OPTIONAL
1A22 SYMBIO800 UNIT CONTROLLE R
4Y2
LTE
MODEM

Air-Fi Installation

Refer to BAS-SVX040*-EN for more information. Mounting
and wiring of Air-Fi module (0185-0424-0100).
1. Drill a 0.87-inch holes on the top of polycarbonate box,
align this hole with thread hole on the module, and securely
fasten the Air-Fi module by M4 screw.
2. Connect Air-Fi module to Symbio™ 800 by Modbus 
cable.
3. Remove the cover of module, connect 4 wires cable into 4
wire connector and plug in Air-Fi module, connect other
side of cable into two 2 wire connectors and plug them into
the Symbio™ 800 controller IMC terminal.
Figure 18. Connecting wiring harness
CVRF-SVN005C-EN
- + G - + - + G +24 - + G
VDC
P2 P3 IMC
MODBUS MACHINEBUS
ETHERNET
USB
1 2
1 2 3 4
Figure 19. Wiring harness connection
IMC
+24 B
VDC
SERVICE
TOOL
Figure 20. Air-Fi wiring, ref. 50712738
RED
1X3-1
BLK
1X3-2
BLU
1X3-3
IMC
A - + -
P1
BACKNET
1A22 SYMBIO800 UNIT CONTROLLER
1

LTE Modem Installation

Modem part is MOD03184, MODULE; CELLULARLE USB 2.9
METER CABLE. Refer to provided literature for setup and
operation details.
1. Drill a 1.36-inch holes on the top of polycarbonate box,
securely fasten the LTE modem by gasket and nut which
provided by modem.
2. Connect LTE modem to Symbio™ 800 by USB cable which
provide by module, plug USB MICRO-B side to bottom of
LTE modem and USB-A side to any one of the four USB
ports under the Symbio™ 800 controller.
+ G - + - + G +24 - + G
VDC
IMC
P2 P3
MODBUS MACHINEBUS
ETHERNET
USB
1 2
2 3 4
Installation
OPTIONAL
4K48
AIR-FI
INTERFACE
IMC
+24 B
VDC
SERVICE
TOOL
23