Table of Contents
Advertisement
11 NETWORK CONNECTIONS
Note: All digiGate systems are shipped on DHCP. Port 8080 will need to be unblocked from your firewall if the
connection is being blocked.
11.1 ETHERNET (RJ45)
IMPORTANT – Test the Ethernet connection with another device like a laptop before connecting to digiGate to
ensure the connection is functioning and stable.
Step 1:
Plug one end of the Ethernet cable into the Ethernet port on the digiGate as below.
Step 2:
Plug the other end of the cable into your router, access point, network switch or
ethernet-over-power (powerline) device.
Step 3:
The LEDs will flash green (100mb/s) or yellow (1Gb/s) depending on your network
speed while the digiGate is online.
11.2 WIFI CONNECTION
IMPORTANT – If you are using an Ethernet connection, you do not need to use a WiFi antenna. Please ensure
you do not have both plugged in at once to avoid network connectivity issues.
Step 1:
Plug the WiFi antenna into any of the USB ports on the digiGate. Your WiFi antenna
may differ in size depending on the one ordered with your digiGate system.
digiGate.co.uk
25
Advertisement
Table of Contents
