Table of Contents
Advertisement
Step 5:
Perform the same on the second switch which controls door number 2. The
terminals used for this are 6 & 7 on the digiGate. Polarity between the pairs does not matter
as long as they are not both connected to the same.
Step 7:
Re-assemble the switches again with the fronts fixed back in place. Ensure no metal
from the cables is exposed.
Step 8:
With the cables connected, position the digiGate onto the mount you have fixed on
the wall. Instructions can be found in section 10.
Step 9:
Connect power, WiFi antenna (if used) and switch on. Power types and instructions
can be found in section 5.4.
10 MOUNTING YOUR DIGIGATE
Instructions on how to mount your digiGate using the provided wall mount.
Step 1:
Position your digiGate to the left of the mount.
Step 2:
Slide the digiGate to the right on top of the mount until you feel it click into place.
Step 3:
Ensure the digiGate is firmly in place and will not easily slide off the mount.
digiGate.co.uk
24
Advertisement
Table of Contents
