Import With Ft3D Format; Export With Ft3D Format; Print; Exit - Yaesu ADMS-12 Instruction Manual

• Import with FT3D format

To create a data file for the import of data, save the spreadsheet in the "CSV" comma separated file format
(FT3D).
A spreadsheet may be easily created by exporting the template data in the "CSV" format using the ADMS-
11 "Export" command.
A separate import file is needed for each template. For example, to import the VFO and memory templates;
first, click the "VFO" tab to display the VFO template, then import the VFO (CSV) file; next, click the "Mem-
ories" tab to display the "Memory" template; then import the Memory (CSV) file.

• Export with FT3D format

To export the data file in the "CSV" (Comma Separated Values) format for the ADMS-11.
Click the "Export with FT3D format" parameter in the "File" menu, On the "Save as" screen displayed,
specify the directory and file name and save the file.
Type a file name in the bottom box, then click the [OK] button.

• Print

To print the current template file data to hard copy, click the "Print" parameter in the "File" menu, the "Print"
window will open to enable printing. Set the start line and the end line of the data you want to print, and
then click the "Printing" button to start printing.
To change the specific printer settings, go to the Printer properties by clicking the the "Printer setup" button.

• Exit

To exit the ADMS-12 programmer, click the "Exit" parameter in the "File" menu to close the ADMS-12 soft-
ware.
If the following pop-up screen appears to confirm saving, follow the on-screen instruction to select the
desired button and close the ADMS-12 software.
13