Vfo A / Vfob; About The Setting Items Of Vfo A / Vfo B Frequencies; Receive Frequency; Transmit Frequency - Yaesu ADMS-12 Instruction Manual

VFO A / VFO B
Edit the VFO A / VFO B configurations for each band on this page template.

About the setting items of VFO A / VFO B frequencies

• Receive Frequency

Enter the VFO frequencies for each band. The FTM-300DR/DE default Frequencies are pre-entered into
the ADMS-12 standard template.
A frequency that is out of the transceiver's range cannot be entered. When the error pop-up window is
opened, enter the correct frequency.

• Transmit Frequency

The transmit frequency display is grayed out, and it will be set automatically, in accordance with the re-
ceive, and the offset frequencies.

• Offset Frequency

When a transmit frequency is not entered, transmission will be performed at a frequency obtained by add-
ing/subtracting the offset frequency to/from the receive frequency.

• Offset Direction

Set the frequency shift direction.
OFF: The transmit frequency is not shifted.
-RPT: The transmit frequency is shifted to the minus offset.
+RPT: The transmit frequency is shifted to the plus offset.

• AUTO MODE

When tick the check box of AUTO MODE, the receive mode (FM mode or AM mode) is automatically se-
lected. Un-ticking the checkbox enables selecting the operating mode.

• Operating Mode

Select the operating mode for receive channel.
FM: The selected frequency band is set to FM mode.
AM: The selected frequency band is set to AM mode.

VFO A / VFOB

24