Yaesu ADMS-12 Instruction Manual page 28

Table of Contents

• CTCSS Frequency

This item selects the Tone Frequency of the Tone Squelch.

• DCS Code

Select the DCS code when DCS is set.

• User CTCSS

Select the idle line frequency to remove signals such as idle line signals used by private railways and con-

trol signals of MCA radio system.

• RX DG-ID

Select the receiving DG-ID number.

• TX DG-ID

Select the transmitting DG-ID number

• Tx Power

This item selects the TX Power.

• Step

Sets the channel step for receiving channels. Normally, when a frequency is entered, the optimal channel

step will be automatically set according to the frequency.

• Narrow

By ticking the checkbox of this item, switches to the Narrow FM mode. The degree of modulation becomes

half the normal level.

• Clock Shift

When an internal spurious signal occurs due to the microcomputer clock, turn this setting on (tick the

checkbox). This may improve the situation.

Usually, this item is set to "OFF" (un-tick the checkbox).

• Comment

Comments may be added to the edited HOME channels. Up to 255 letters can be used. This function is

useful in organizing the HOME channels by, for example, applying a category name to each channel.

These comments are not transferred to the FTM-300DR/DE.

Table of Contents