Ryobi R36LMW16 Manual page 8

1
Wear full eye protection, ear protection,
non-slip heavy-duty gloves, substantial
footwear, and long trousers at all times
while operating the product. Do not
operate the product when barefoot or
wearing open sandals.
6
1
2
4
5
Adjust the operating angle of the handle to your preference. Pull the quick-release
fastener, and turn it 90°. Align the handle to the preferred locking slot. Turn the
fastener knob 90°, and insert the fastener bolt into the slot.
NOTE: The grass catcher collects
grass clippings preventing them from
being discharged across the lawn while
mowing.
8
Getting started
2
Set the handle in the correct operating
position. Ensure that the locking pin in
the lower handle clicks into place.
3
8
1
2
Open the battery door. Insert the active
battery pack into the active battery port.
Make sure that the latch on the battery
pack clicks in place, and that the battery
pack is secured before operating the
product.
3
Open the handle lock.
7a
1
2
For mulching operation, install the
mulching plug. Raise the rear door,
and insert the mulching plug into the
rear discharge opening. Ensure that the
mulching plug is secured, then lower
the rear door.
NOTE: Only one battery port is active
during operation of the product. Use the
other battery port to store an additional
battery pack as backup.