Advertisement
Table of Contents
- 1 Intended Use
- 2 General Safety Warnings
- 3 Personal Safety
- 4 Work Area Safety
- 5 Lawnmower Safety Warnings
- 6 Product Features
- 7 General Mowing Tips
- 8 Transportation and Storage
- 9 Transporting Lithium Batteries
- 10 Maintenance
- 11 Clearing Blockages
- 12 Symbols on the Product
- 13 Symbols in this Manual
- 14 Product Specifications
- 15 Replacement Parts
- 16 Battery and Charger
- Download this manual
Advertisement
Table of Contents
Related Manuals for Ryobi R36XLMW10
Summary of Contents for Ryobi R36XLMW10
- Page 1 FRONT PAGE R36XLMW10 R36XLMW16...
-
Page 2: Intended Use
■ Do not use the product near drop-offs, IMPORTANT! ditches, excessively steep slopes, or It is essential that you read the instructions embankments. in this manual before assembling, operating, ■ Always wear safety glasses. and maintaining the product. ■ The product is capable of amputating hands Subject to technical modification. -
Page 3: Lawnmower Safety Warnings
BATTERY TOOL USE AND CARE ■ Under abusive conditions, liquid may be ejected from the battery; avoid contact. ■ Read, understand, and always follow If contact accidentally occurs, flush with the safety instructions which came with water. If liquid contacts eyes, additionally your battery and charger. -
Page 4: Product Features
near or under rotating parts. Keep clear of ADDITIONAL BATTERY SAFETY the discharge opening at all times. WARNINGS ■ Never pick up or carry the product while it To reduce the risk of fire, personal injury, is running. and product damage due to a short circuit, ■... -
Page 5: Transporting Lithium Batteries
stop. Allow the product to cool down before ■ Be careful during adjustment of the product storing or transporting. to prevent entrapment of the fingers between moving blades and fixed parts of ■ Remove all foreign materials from the the product. product. -
Page 6: Symbols In This Manual
Wear eye protection. Do not operate the product on inclines greater than 15°. Mow across the face of slopes, never up and down. Do not expose the product to rain or damp condition. Beware sharp blades. Blades continue rotate after the motor is turned off. Remove isolator before maintenance. - Page 7 R36XLMW10 On/off lever Dashboard and fuel gauge Start button Telescopic handle Handle lock Isolator key Height adjustment release key Quick-release fastener EASYCATCH™ grass catcher Battery door Blade change U-bolt Rear wheel Front wheel Operator's manual Mulching plug Battery pack Charger...
- Page 8 Wear full eye protection, ear protection, Adjust the operating angle of the handle to your preference. Turn the quick- non-slip heavy-duty gloves, substantial release fastener 90° clockwise. Align the handle to the preferred locking slot. Turn footwear, and long trousers at all times the fastener 90°...
- Page 9 Rotate handle lock levers Fully extend the upper handle. Make sure that the upper handle is fully counterclockwise to unlock the upper extended. handle. NOTE: The grass catcher collects For bagging operation, insert the metal Open the battery door. Install one or frame of the grass catcher into the grass clippings preventing them from two battery packs.
- Page 10 Using the grass Using the mulching Cleaning and Adusting the p.14 p.11 p.12 p.19 catcher plug storing the product cutting height Cutting with EASY Emptying the grass Replacing the blade p.15 p.14 p.18 EDGE catcher...
- Page 11 USING THE GRASS CATCHER WARNING: Avoid holes, ruts, bumps, rocks, property stakes, or other hidden objects. WARNING: Do not operate the product on inclines greater than 15°. Mow across the face of slopes, never up and down. 1. Open the battery door. Insert one or two battery packs into the product.
- Page 12 4. Press the start button, then squeeze and hold either side of the on/off lever to start the product. Release the start button and keep holding the on/off lever to keep using the product. NOTE: Allow up to 2 seconds for the self- propel function to reach full speed.
- Page 13 Open the battery door. Insert one or two battery packs into the product. Make sure that the latch on the battery pack snaps in place, and that the battery pack is secured before operating the product. Insert the isolator key. Close the battery door.
- Page 14 CUTTING WITH EASY EDGE EASY EDGE allows the product to easily cut the grass along walls or the edge of the lawn. NOTE: EASY EDGE pulls grass towards the blade when the product is running along a wall or the edge of the lawn. ADJUSTING THE CUTTING HEIGHT NOTE: Properly hold the carry handle while adjusting the cutting height.
- Page 15 Pull up or push down the deck to the preferred cutting height. Refer to the height label and indicator. Make sure that the cutting height is securely locked into position before mowing. NOTE: The cutting height can be adjusted to 10 positions. Cutting heights may vary in particular products.
- Page 16 2. Tilt the product on its side. WARNING: The blade on the product is sharp. Use extreme caution, and wear heavy- duty gloves when fitting, replacing, cleaning, or checking bolt security. Remove all grass clippings and debris from the cutting deck and blade. 4.
- Page 17 6. Remove the blade nut, spacer, and washer. Remove and properly dispose of the old blade. 7. Install the new blade, washer, spacer, and nut. 8. Insert the blade change U-bolt into the cutting deck holes to prevent the blade from spinning during tightening the blade nut.
- Page 18 EMPTYING THE GRASS CATCHER NOTE: Stop mowing when the grass catcher is full. Empty the grass catcher before resuming operation. 1. Release the on/off lever to turn off the product. 2. Remove the grass catcher. 3. Remove the grass clippings from the grass catcher into a bin.
- Page 19 CLEANING AND STORING THE PRODUCT 1. Release the on/off lever to turn off the product. 2. Open the battery door. Remove the battery packs. Remove the isolator key, and close the battery door. 3. Remove all foreign materials from the product.
- Page 20 5. Open the handle locks. Push the upper handle into the lower handle until the handle is fully retracted. 6. Close the handle locks to secure the handle. 7. Turn the quick-release fastener 90° counterclockwise. Push handle forward until it is perpendicular to the floor, then turn back the quick-release fastener to align with the handle.
-
Page 21: Product Specifications
PRODUCT SPECIFICATIONS REPLACEMENT PARTS Cordless lawnmower Blade RMLB1 (000990214) Model R36XLMW10 Grass catcher 317048001 Rated voltage 36 V d.c. WARNING! The declared vibration total values and the declared noise emission values given in this instruction Width of cut 46 cm... - Page 24 Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. EASYCATCH is a trade mark of Techtronic Cordless GP. SMART BOOST is a trade mark of Techtronic Cordless GP.