Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi R36XLMWS6
Summary of Contents for Ryobi R36XLMWS6
- Page 1 FRONT PAGE R36XLMWS6 R36XLMWS0...
-
Page 2: Intended Use
■ Do not use the product near drop-offs, IMPORTANT! ditches, excessively steep slopes, or It is essential that you read the instructions embankments. in this manual before assembling, operating, ■ Always wear safety glasses. and maintaining the product. ■ The product is capable of amputating hands Subject to technical modification. -
Page 3: Lawnmower Safety Warnings
BATTERY TOOL USE AND CARE ■ Do not incinerate the battery. ■ Read, understand, and always follow ■ Under abusive conditions, liquid may be the safety instructions which came with ejected from the battery; avoid contact. your battery and charger. Failure to do If contact accidentally occurs, flush with so may result in electric shock, fire or water. - Page 4 ■ Turn on the product carefully according to damaged during assembly or when folding instructions, and keep hands and feet away the handle. from the blades. Do not put hands or feet near or under rotating parts. Keep clear of ■...
-
Page 5: Transportation And Storage
■ When cutting long grass, reduce walking ■ Turn off the product, and remove the isolator speed to allow for more effective cutting and key and the battery pack. Make sure that all a proper discharge of the clippings. moving parts have come to a complete stop before any cleaning or maintenance task. -
Page 6: Symbols On The Product
Remember that the blade may move during Regulatory Compliance cleaning. Mark (RCM). This product meets applicable regulatory SYMBOLS ON THE PRODUCT requirements. Safety alert Guaranteed sound power level Read and understand all Waste electrical products instructions before operating the should not be disposed of product. - Page 7 Self-propel lever One-touch handles fold lever One-touch folding handles Height adjustment lever Grass catcher Battery door Side discharge chute cover Side discharge chute Rear wheel Front wheel Mulching plug Safety key Operator's manual Battery pack Charger R36XLMWS6 Know your product...
- Page 8 Wear full eye protection, ear protection, Set the handle in the correct operating Switch the fold lever to unlock the non-slip heavy-duty gloves, substantial position. Ensure that the locking pin in folding handle. footwear, and long trousers at all times the lower handle clicks into place.
- Page 9 NOTE: Side discharge operation allows For side discharge operation, install the mulching plug and side discharge chute. the grass cuttings to be released Raise the rear door, and insert the mulching plug into the rear discharge opening. towards the side instead of the rear. Ensure that the mulching plug is secured, then lower the rear door.
- Page 10 Using the product with Adusting the Cleaning and Using the product with p.15 p.11 p.13 p.18 the side discharge cutting height storing the product the grass catcher chute p.XX Emptying the grass p.15 p.17 Replacing the blade catcher...
- Page 11 USING THE PRODUCT WITH THE GRASS CATCHER WARNING: Avoid holes, ruts, bumps, rocks, property stakes, or other hidden objects. WARNING: Do not operate the product on inclines greater than 15°. Mow across the face of slopes, never up and down. 1.
- Page 12 3. Open the battery door. Insert the battery pack into the product. Make sure that the latch on the battery pack clicks in place, and that the battery pack is secured before operating the product. Insert the safety key. Close the battery door.
- Page 13 USING THE PRODUCT WITH THE SIDE DISCHARGE CHUTE WARNING: Avoid holes, ruts, bumps, rocks, property stakes, or other hidden objects. WARNING: Do not operate the product on inclines greater than 15°. Mow across the face of slopes, never up and down. 1.
- Page 14 NOTE: Side discharge operation allows the grass cuttings to be released towards the side instead of the rear. 4. Open the battery door. Insert the battery pack into the product. Make sure that the latch on the battery pack clicks in place, and that the battery pack is secured before operating the product.
- Page 15 ADJUSTING THE CUTTING HEIGHT To adjust the deck height, pull the height adjustment lever towards the wheel, then raise or lower the deck to the preferred height. Make sure that the handle is always secured into one of the height slots. NOTE: The cutting height can be adjusted to 7 positions.
- Page 16 WARNING: The blade on the product is sharp. Use extreme caution, and wear heavy- duty gloves when fitting, replacing, cleaning, or checking bolt security. 3. Remove all grass clippings and debris from the cutting deck and blade. 4. Insert a piece of wood into the cutting deck to prevent the blade from spinning during loosening of the blade nut.
- Page 17 7. Insert a piece of wood into the cutting deck to prevent the blade from spinning during tightening the blade nut. Hand- tighten the nut until the blade is secured and does not shake.Then use a spanner to further tighten the nut by 1/2 turn (35- 40 Nm torque).
- Page 18 3. Remove the grass clippings from the grass catcher into a bin. CLEANING STORING PRODUCT 1. Release the on/off triggers to turn off the product. 2. Open the battery door. Remove the battery packs. Remove the safety key, and close the battery door. 3.
- Page 19 4. Remove all foreign materials from the product. Clean the product with a soft, dry cloth, or cleaning brush. WARNING: Do not use water to clean the product. 5. Switch the fold lever then fold down the folding handle. 6. Fold the grass catcher and place it on top of the product.
-
Page 20: Product Specifications
(in case A-Weighted sound power level = 96.9 dB(A) of vibration), and organising work patterns. Uncertainty of measurement K = 0.6 dB 98 dB(A) BATTERY AND CHARGER Model R36XLMWS6 R36XLMWS0 Battery pack BPL3660D, R36BTY4 Weight 3.4 kg Charger R36CHR3P... - Page 24 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 961497024-01...