Ryobi R36LMW16 Manual page 16

2. Tilt the product on its side.
3. Remove all grass clippings and debris
from the cutting deck and blade.
WARNING: The blade on the product is
sharp. Use extreme caution, and wear heavy-
duty gloves when fitting, replacing, cleaning,
or checking bolt security.
4. Insert blade change u-bolt into the cutting
deck holes to prevent the blade from
spinning during loosening of the blade
nut. Loosen the blade nut.
5. Remove the blade change u-bolt, blade
nut, spacer, and washer. Remove and
properly dispose of the old blade.
16
Maintenance
2
3
4
2
5
1