Replacing A Lost Key Or Remote Control - Ford ENDURA 2017 Owner's Manual

E151956
1. Insert the key blade into the slot on the
bottom of the handle and press up.
2. While maintaining upward pressure,
move the cap rearward to release it.
Gently remove the key while doing so.
To install the cap:
E151957
1. Place the cap just forward of the key
cylinder.
2. While applying pressure to the cap,
move it forward until it is in place. You
may hear a snap as it engages.
Make sure you have properly installed the
cap by trying to move it rearward.
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Keys and Remote Controls
Car Finder
Press the button twice within
three seconds. The horn sounds
and the direction indicators
E138623
flash. We recommend you use this method
to locate your vehicle, rather than using
the panic alarm.
Sounding a Panic Alarm
Note: The panic alarm only operates when
the ignition is off.
Press the button to sound the
panic alarm. Press the button
again or switch the ignition on to
E138624
deactivate.
Memory Feature
You can use the remote control to recall
memory positions. If programmed to a
pre-set position, the remote control recalls
memory positions when you unlock your
vehicle. See Memory Function (page 108).
REPLACING A LOST KEY OR
REMOTE CONTROL
Replacement keys or remote controls can
be purchased from an authorized dealer.
Authorized dealers can program remote
controls for your vehicle. See Passive
Anti-Theft System (page 44).
31
(If Equipped)