Ford ENDURA 2017 Owner's Manual page 263

Specifications
Materials
Engine Oil - SAE 0W-30
Engine Oil - SAE 5W-30
Antifreeze
Brake Fluid
Manual Transmission Fluid - SAE 75W
Automatic Transmission Fluid
Windshield Washer Fluid
Refrigerant - R-1234yf
Refrigerant Oil
Multi-Purpose Grease
Only use fluid that meets Ford
specifications.
Vehicles with diesel particulate filters
must use oil to specification
WSS-M2C950-A to avoid damage to the
filter. If you are unable to find an oil that
meets this specification, you must use an
SAE 0W-30 oil that meets the
specification defined by ACEA C2.
Vehicles without diesel particulate filters
must use oil to specification
WSS-M2C913-D. If you are unable to find
an oil that meets this specification, you
must use an SAE 5W-30 oil that meets the
specification defined by ACEA A5/B5.
Note: Do not use more than 1 L of the
alternative engine oil between scheduled
service intervals.
Using oil and fluids that do not meet the
defined specification and viscosity grade
may lead to:
• Component damage which may not be
covered by the vehicle Warranty.
• Longer engine cranking periods.
Materials
Name
Engine Oil - SAE 0W-30
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Capacities and Specifications
Name Specification
WSS-M2C950-A
WSS-M2C913-D
WSS-M97B44-D
WSS-M6C65-A2
WSS-M2C200-D2
MERCON® LV
WSS-M2C938-A
WSS-M14P19-A
WSS-M17B21-A
WSS-M2C300-A2
ESB-M1C93-B
• Increased emission levels.
• Reduced engine performance.
• Reduced fuel economy.
• Degraded brake performance.
E115472
We recommend Castrol and Ford engine
oils and lubricants.
Alternative Engine Oil for
Extremely Cold Climates
To improve engine cold start performance,
we recommend that you use the following
alternative engine oil in extremely cold
climates, where the ambient temperature
reaches -30°C or below.
Specification
WSS-M2C953-A1
260