Table of Contents
Advertisement
FEATURES & OPERATIONS
I)
CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE)
There are three possible display modes to view the day, seconds, and temperature.
The month&date/weekday/moon phase/indoor temperature is the default.
To change the display:
1) Press the "+" button. The display should now show the
month&date/weekday/moon phase/seconds.
2) Press the "+" button a second time and the display will now show the
month&date/seconds/moon phase/indoor temperature.
3) Press the "+" button a third time and the display will return to the normal
display.
II) THE ALARM
A) SETTING THE ALARM
Note: The duration of the alarm is 85 seconds. After each of the first two 25
second periods, the rate of the alarm increases.
1) Hold down the "ALARM" button for 5 seconds. The "TIME" icon to the
right of the minutes (in the time LCD) shifts to "ALARM", and the hour
digit of the alarm flashes.
2) Press the "+" button to set the alarm hour.
3) Press the "ALARM" button to confirm the hour, and to set the alarm
minutes.
4) The alarm minutes flash, press the "+" button to set the alarm minutes.
5) Press the "ALARM" button to confirm and to exit the alarm setting mode.
Note: The alarm will be automatically set to sound when exiting the alarm-
setting mode (indicated by the alarm "sound" icon to the right of the time).
B) ACTIVATING/DEACTIVATING THE ALARM
1) The alarm will be automatically set to sound when exiting the alarm-setting
mode (indicated by the alarm "sound" icon to the right of the time).
2) Press the "ALARM" button to activate and deactivate the alarm. The alarm
"sound" icon to the right of the time will appear or disappear, and the alarm
time will be displayed briefly before returning to the normal display mode.
8
Hide quick links:
Advertisement
Table of Contents
