Table of Contents
Advertisement
NTP Server I/II - Enter the address for the NTP Server, then the Router will get the time
from the NTP Server preferentially. In addition, the Router built-in some common NTP
Servers, so it can get time automatically once it connects the Internet.
To configure the system manually:
1.
Select your local time zone.
2.
Enter date and time in the right blanks.
3.
Click Save to save the configuration.
To configure the system automatically:
1.
Select your local time zone.
2.
Enter the IP address for NTP Server I or NTP Server II.
3.
Click the Get GMT button to get system time from Internet if you have connected to the
Internet.
Note:
1)
This setting will be used for some time-based functions such as firewall. You must specify
your time zone once you login to the Router successfully; otherwise, these functions will not
take effect.
2)
The time will be lost if the Router is turned off.
3)
The Router will obtain GMT automatically from Internet if it has already connected to
Internet.
4.16.2 Diagnostic
Choose menu "System Tools → Diagnostic", you can transact Ping or Traceroute function to
check connectivity of your network in the following screen.
TL-MR3220
3G/4G Wireless N Router User Guide
-73-
Advertisement
Table of Contents
