Table of Contents
Advertisement
Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
4)
How to enable DMZ Host: Log in to the Router, click the "Forwarding" menu on the left of
your browser, and click "DMZ" submenu. On the "DMZ" page, click Enable radio button
and type your IP address into the DMZ Host IP Address field, using 192.168.0.169 as an
example, remember to click the Save button.
5)
How to enable H323 ALG: Log in to the Router, click the "Security" menu on the left of
your browser, and click "Basic Security" submenu. On the "Basic Security" page, check
the Enable radio button next to H323 ALG. Remember to click the Save button.
TL-MR3220
Figure A-5 Add or Modify a Virtual server Entry
Figure A-6 DMZ
-83-
3G/4G Wireless N Router User Guide
Advertisement
Table of Contents
