Table of Contents
Advertisement
Note:
The default PIN code of the Router can be found in its label or the WPS configuration screen as
Figure 4-2.
c).
You will see the following screen when the new device successfully connected to the
network.
Note:
1)
The status LED on the Router will light green all the time if the device has been
successfully added to the network.
2)
The WPS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
TL-MR3220
The WPS Configuration Screen of Wireless adapter
3G/4G Wireless N Router User Guide
-18-
Advertisement
Table of Contents
