Model:
Model TH-C1
Raising/lowering the front side of the fusing unit
Feed direction
Paper
If the image shown by the dotted line occurs:
Attach the new Adjust Plate (B1544122, 2 screws, inside out), and secure the screws at
the upper position.
Note: This will raise the front side of the fusing unit.
If the image shown by the solid line occurs:
Attach the new Adjust Plate (B1544122, 2 screws, inside out), and secure the screws at
the lower position.
Note: This will lower the front side of the fusing unit.
T
echnical
Parallel
Image Area
B
ulletin
Date:
23-Jul-07
Image shown by the dotted line:
Raise the front side of the unit
Image shown by the solid line:
Lower the front side of the unit
PAGE: 2/4
No.:
RB156037