Siemens SiPass integrated Reference Manual page 46

Hide thumbs Also See for SiPass integrated:
Table of Contents

Advertisement

Controller Event Tasks
8
Sources
46 | 66
Type
State (trigger)
Online
Power Fail
Power OK
Reset
Door Interlocking
Door Interlocking
Alarm
Door Interlocking
Disabled
Interlocking
Operational
Floor
Bank Floor Enabled
Bank Floor Secure
Bank Floor Unsecure An event task is triggered when the selected
Host Control
Cleared
Set
Input Point
Active
(Device)
Normal
Open
Short
Input Point (logical) Door Closed
Door Forced
Door Held
Description
An event task has been triggered when
communications between the device and the
ACC are restored.
An event task is triggered when the power
supply to the selected device fails.
An event task is triggered when the power
supply to the selected device has been re-
stored.
An event task is triggered when the selected
device is reset.
Door Interlocking alarm state.
Door Interlocking is disabled.
Door Interlocking is enabled.
An event task is triggered when the selected
bank floor is disabled.
An event task is triggered when the selected
bank floor is enabled.
An event task is triggered when the selected
bank floor is secured.
bank floor is unsecured.
This Type allows a Controller Event Task to be
triggered from a Host Event Task.
An event task is triggered when the Controller
Event Task has not been triggered or has
been reset.
An event task is triggered when the Controller
Event Task has been triggered.
An event task is triggered when the input point
has been enabled or activated.
An event task is triggered when the input point
has been restored.
An event task is triggered when the input point
has registered a Tamper event i.e. wires have
been cut.
An event task is triggered when the input point
has registered a Tamper event i.e. the device
has been shorted.
An event task is triggered when a door monitor
has registered that a door has closed.
An event task is triggered when the door
monitor has registered that a door has been
forced open.
An event task is triggered when a door monitor
has registered that a door has been held open
for longer than the Input Delay time.
A6V11144326

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents