Siemens SiPass integrated Reference Manual page 30

Host event tasks
7
Sources
30 | 66
Source State (trigger)
Self Authorization
Granted
Soft Perimeter
Violation
Time Schedule
Violation
Timed Re-Entry Error A cardholder has attempted to re-enter an area
Turnstile in Use-
Readers Disabled
Valid
Valid Card Presented A host event task is triggered when a valid card
Void card
Access Point Same as Access
Group Points with less
"States" options
Anti-Passback Area Count Reset
Area Point
Area Mode Changed An Area mode has been changed.
Capacity Empty
Capacity Exceeded
Capacity Full
Capacity Not Empty
Capacity Not Full
Same as Access
Points
Workgroup Capacity
Empty
Workgroup Capacity
Exceeded
Workgroup Capacity
Full
Workgroup Capacity
Not Empty
Description
Cardholder has self-authorized on a Dual
Custody access point.
An anti-passback violation has occurred at a
door under soft anti-passback control.
A host event task is triggered when a card is
presented at a reader outside the cards pro-
grammed time schedule for that reader/door.
(set to Timed Re-Entry Anti-Passback mode)
before their permitted re-entry time.
A cardholder has been denied access at a
turnstile due to the turnstile being already in
used by another cardholder.
A host event task is triggered when the point is
returned to any restore state, assuming an alarm
class has been con-figured for the access point.
is presented at a reader at a delayed reporting
mode reader.
A host event task is triggered when a card that is
void is swiped at a card reader.
See above
An Area count has been reset.
The area is vacant.
An event task is triggered when the count for the
number of cardholders currently in the anti-
passback area is above the specified capacity.
An event task is triggered when the count for the
number of cardholders currently in the anti-
passback area has reached the specified
capacity.
The area is no longer empty.
The number of cardholders in the area does not
exceed the defined maximum.
See above.
The number of cardholders in the area from a
Workgroup is zero.
The number of cardholders in the area from a
Workgroup has exceeded the maximum for that
Workgroup.
The number of cardholders in the area from a
Workgroup has reached the maximum for that
Workgroup.
The number of cardholders in the area from a
Workgroup is no longer zero.
A6V11144326