Diagnostics Via The Led Display - Siemens SIMATIC Ident RF360R Configuration Manual

Service and maintenance
8.1 Diagnostics
8.1.1

Diagnostics via the LED display

The following figure shows details of the LEDs of the RF360R.
①
②
③
Figure 8-1
76
Status LED display
• RUN/STOP (R/S)
• ERROR (ER)
• MAINTENANCE (MAINT)
PROFINET/Ethernet LED display
• LINK P1 (LK1)
• LINK P2 (LK1)
Reader LED display
LED displays of the reader
Shows whether the reader is ready for operation.
Indicates whether an error has occurred.
Shows whether the reader needs maintenance.
Indicates that there is a link via Ethernet interface "1".
Indicates that there is a link via Ethernet interface "2".
• Indicates whether there are one or multiple transponders
in the antenna field.
• Indicates whether communication with the reader is
taking place and whether a reader error has occurred.
• Time in "Setup" mode shows how good the
communication quality between the reader and
transponder is.
Configuration Manual, 03/2022, C79000-G8976-C629-02
SIMATIC RF360R