Unit Startup - Trane IPG315D User Manual

Unit Startup

To activate the unit press for more than 2 seconds the button indicated by the symbol of the sun
, or with the snow
Following the activation, on the main screen, according to the selected mode, you will see the label
"Unit ON: Cooling", if you selected the summer mode, or "Unit ON: Heating", if you selected the
winter mode, and the button of the other mode will disappear.
As for the activation, you can turn off the unit by simply pressing for more than 2 seconds the same
button that you used for the activation.
Following the shutdown of the unit, on the main screen the label "Unit Stand-by" and the button of the
other mode will display.
In the case that the unit is controlled by remote or during the time slot shutdown, on the main screen
will display the label, respectively "Unit Remote Off" or "Unit Off by Clock".
At the start up, first of all, the pumps will run and, at the same time, the compressor icon
pressor enable" will begin to flash for a set time, after that, the compressor will run and the related
icon will displayed fix.
The cycles are easily recognizable by the icons of the active components, which appear on the main
screen, in particular for air-water versions:
 Chiller
 Heat Pump
 Defrost
For water-water unit, instead:
 Chiller
 Heat Pump
, until the label "Unit Stand-by" is displayed.
"com-