English
Key tone ON/OFF
The key tone set at the factory for confirming an entry
can be switched off.
Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
Press and hold the MENU key and
prox. three seconds.
Use the
keys to select the KEY TONE sym-
bol. The symbol flashes.
Press the ENTER key. The ON symbol flashes.
Press the
key. OFF flashes.
Press the ENTER key. Setting is complete.
P5 – Temperature in energy saving mode
NOTE
The function set out below does not apply for wall-
mounted room thermostats.
Display or change temperature value.
EN-22
P7 – Correction of room temperature value
The function set out below does not apply for wall-
mounted room thermostats.
key for ap-
Only change if the value displayed can be proven to
depart from the actual room temperature.
2202/D
Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
Press and hold the MENU key and
prox. three seconds.
Use the
keys to select display P5. P5 flashes.
Press the ENTER key. OFF flashes.
Use the
keys to select ON. ON flashes.
Press the ENTER key. Display P5 down flashes.
Press the ENTER key. Display e.g. 16 °C flashes.
Use the
keys to select the temperature value
for energy saving mode.
Press the ENTER key. Setting is complete.
NOTE
NOTE
Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
Press and hold the MENU key and
prox. three seconds.
Use the
keys to select display P7. P7 flashes.
Press the ENTER key. 0 °C flashes.
Use the
keys to set the correction value.
Press the ENTER key. Setting is complete.
Operation
key for ap-
key for ap-
www.dimplex.eu