Dimplex VFE 20 Installation And Operating Instructions Manual page 47

Operation
9.2. Main menu
Other setting options are shown in the main menu.
Hold down the MENU key. The display initially

switches to the CHARGING menu. Continue to
hold the key (for approx. 3 seconds in total). The
display switches to the main menu.
Tap on the MENU key briefly again. The supple-

mentary heating symbol flashes.
Use the  keys to select one of the adjusters

described below:
A - Supplementary heating on/off
B - Timer (week program)
D - Frost protection temperature 7° C
E - Set the time and date
www.dimplex.eu
Supplementary heating
NOTE
The function set out below does not apply for wall-
mounted room thermostats.
NOTE
This function can only be used if a supplementary
heating (accessory) is installed.
Supplementary heating ON
Press and hold the MENU key for approx. three

seconds.
The display switches to the main menu.
Press the MENU key.

The SUPPLEMENTARY HEATING symbol flashes.
Press the ENTER key. OFF flashes.

Press the key. ON flashes.


Press the ENTER key. Switch-on duration flashes.

Define the switch-on duration with the

Press the ENTER key. Temperature flashes.

Use the
 

perature.
Press the ENTER key. Setting is complete.

Supplementary heating OFF
Press and hold the MENU key for approx. three

seconds.
The display switches to the main menu.
Press the MENU key.

The SUPPLEMENTARY HEATING symbol flashes.
Press the ENTER key. ON flashes.

Press the key. OFF flashes.


Press the ENTER key. Setting is complete.

NOTE
If the supplementary heating is controlled via a wall-
mounted room thermostat, the conversion set item
no. 459270.28.61 must be integrated.
2202/D
keys to set the desired comfort tem-
English
key.

EN-19